Three new food-related products, including Behenamide, have passed the technical evaluation by the Expert Evaluation Committee (for details, please refer to the Annex). The CFSA is accepting written comments until November 23, 2024. These are in accordance with the “Regulations on Administration of Administrative License for New Food-Related Products” and “Regulations on Declaration and Acceptance of New Food-Related Products”.
Additives for Food Contact Materials and Products Expand Application Scope
Behenamide
|
Product Name |
Behenamide |
|
CAS Number |
3061-75-4 |
|
Application Scope |
Plastics: PBT; PLA |
|
Maximum level /% |
0.4 |
|
Specific migration limits / (mg/kg) |
- |
|
Maximum residue limit/ (mg/kg) |
- |
|
Remark |
PBT and PLA plastic materials and products shall be restricted to single-use only when mixed with Behenamide; used for filling at room temperature (including hot filling, pasteurization, or other heat treatments) and then stored for a long period of time at room temperature (t>3d). The above restricted use requirements should be labeled in accordance with the provisions of GB 4806.1. |
New Resins for Food Contact Materials and Products
1,4-Benzenedicarboxylic acid, polymer with 2-methyl-1, 3-propanediol and tricyclodecanedimethanol
|
Product Name |
1.1,4-Benzenedicarboxylic acid, polymer with 2-methyl-1, 3-propanediol and tricyclodecanedimethanol |
|
CAS Number |
1699749-26-2 |
|
Application Scope |
Paint & Coating |
|
Maximum level /% |
25 (In terms of the dry weight of the coating film) |
|
Specific migration limits / (mg/kg) |
7.5 (1,4-benzenedicarboxylic acid). 5 (polymer with 2-methyl-1). 0.05 (3-propanediol and tricyclodecanedimethanol) |
|
Maximum residue limit/ (mg/kg) |
- |
|
Remark |
The paints and coatings produced with the substance as raw material shall not be used in the production of food contact materials and products for infants and young children, and the use temperature shall not exceed 131℃. The above restricted use requirements should be labeled in accordance with the provisions of GB 4806.1. |
Polymer of 1,3-phthalic acid, 1,4-phthalic acid, phthalicanhydride, maleic anhydride and 1,2-propylene glycol, 1,2-ethyleneglycol, diethylene glycol, copolymerof styrene
|
Product Name |
Polymer of 1,3-phthalic acid, 1,4-phthalic acid, phthalicanhydride, maleic anhydride and 1,2-propylene glycol, 1,2-ethyleneglycol, diethylene glycol, copolymerof styrene |
|
CAS Number |
1253842-93-1 |
|
General category |
unsaturated polyester resin (UP) |
|
Application Scope |
Plastic |
|
Maximum level /% |
No maximum, according to production needs |
|
Specific migration limits / (mg/kg) |
5 (1,3-phthalic acid). 7.5 (1,4-phthalic acid). 30 (maleic anhydride) 30 (1,2-ethyleneglycol) |
|
Maximum residue limit/ (mg/kg) |
- |
|
Remark |
UP plastic materials and products produced from this substance must not be used for the production of food contact materials and products for infants and young children, and the use temperature shall not exceed 70℃, and shall not be used for contact with food with ethanol content higher than 20%, and the S/V shall not exceed 2 dm2/L(kg). The above restricted use requirements should be labeled in accordance with the provisions of GB 4806.1. |
If you need any assistance or have any questions, please get in touch with us via service@cirs-group.com.
Further Information
