On March 20, 2025, the China National Center for Food Safety Risk Assessment (CFSA) issued a call for public comment on the proposed approval of three new food-related products, namely Ammonium salt of dodecanoic acid, Hexanedioic acid, polymer with2-ethyl-2-(hydroxymethyl)-1,3-propanediol and 3-Aminopropyltriethoxysilane. Written comments will be accepted until April 19, 2025, if comments are not sent before the deadline, the CFSA views this as acceptance of its conclusions.
Additives for Food Contact Materials and Products Expand Application Scope
Ammonium salt of dodecanoic acid
|
Product Name |
Ammonium salt of dodecanoic acid |
|
CAS Number |
2437-23-2 |
|
Application Scope |
Paints & Coatings |
|
Maximum level /% |
0.6 |
|
Specific migration limits / (mg/kg) |
- |
|
Maximum residue limit/ (mg/kg) |
- |
|
Remark |
The paints and coatings produced with the substance as raw material must not be used in the production of food contact materials and products for infants and young children. The above-restricted use requirements should be labeled in accordance with the provisions of GB 4806.1. |
Hexanedioic acid, polymer with2-ethyl-2-(hydroxymethyl)-1,3-propanediol
|
Product Name |
Hexanedioic acid, polymer with2-ethyl-2-(hydroxymethyl)-1,3-propanediol |
|
CAS Number |
28301-90-8 |
|
Application Scope |
Paints & Coatings |
|
Maximum level /% |
3 (In terms of the dry weight of the coating film) |
|
Specific migration limits / (mg/kg) |
6 (2-ethyl-2-(hydroxymethyl)-1,3-propanediol) |
|
Maximum residue limit/ (mg/kg) |
- |
|
Remark |
The use temperature must not exceed 121℃. The above-restricted use requirements should be labeled in accordance with the provisions of GB 4806.1. |
3-Aminopropyltriethoxysilane
|
Product Name |
3-Aminopropyltriethoxysilane |
|
CAS Number |
919-30-2 |
|
General category |
unsaturated polyester resin (UP) |
|
Application Scope |
Plastic |
|
Maximum level /% |
0.01125 |
|
Specific migration limits / (mg/kg) |
0.05 |
|
Maximum residue limit/ (mg/kg) |
- |
|
Remark |
UP plastic materials and products produced from this substance must not be used for the production of food contact materials and products for infants and young children, and the use temperature must not exceed 70℃, and must not be used for contact with food with ethanol content higher than 20%, and the S/V shall not exceed 2 dm2/L(kg). The above restricted use requirements should be labeled in accordance with the provisions of GB 4806.1. |
If you need any assistance or have any questions, please get in touch with us via service@cirs-group.com.
Further Information
